RFC 2823 (rfc2823) - Page 1 of 28
PPP over Simple Data Link (SDL) using SONET/SDH with ATM-like framing
Alternative Format: Original Text Document
Network Working Group J. Carlson
Request for Comments: 2823 Sun Microsystems, Inc.
Category: Experimental P. Langner
Lucent Technologies Microelectronics Group
E. Hernandez-Valencia
J. Manchester
Lucent Technologies
May 2000
PPP over Simple Data Link (SDL)
using SONET/SDH with ATM-like framing
Status of this Memo
This memo defines an Experimental Protocol for the Internet
community. It does not specify an Internet standard of any kind.
Discussion and suggestions for improvement are requested.
Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved.
Abstract
The Point-to-Point Protocol (PPP) [1] provides a standard method for
transporting multi-protocol datagrams over point-to-point links, and
RFCs 1662 [2] and 2615 [3] provide a means to carry PPP over
Synchronous Optical Network (SONET) [4] and Synchronous Digital
Hierarchy (SDH) [5] circuits. This document extends these standards
to include a new encapsulation for PPP called Simple Data Link (SDL)
[6]. SDL provides a very low overhead alternative to HDLC-like
encapsulation, and can also be used on SONET/SDH links.
Applicability
This specification is intended for those implementations that use PPP
over high speed point-to-point circuits, both with so-called "dark
fiber" and over public telecommunications networks. Because this
enhanced PPP encapsulation has very low overhead and good hardware
scaling characteristics, it is anticipated that significantly higher
throughput can be attained when compared to other possible SONET/SDH
payload mappings, and at a significantly lower cost for line
termination equipment.
Carlson, et al. Experimental



