RFC 3624 (rfc3624) - Page 1 of 19
The Media Gateway Control Protocol (MGCP) Bulk Audit Package
Alternative Format: Original Text Document
Network Working Group B. Foster
Request for Comments: 3624 D. Auerbach
Category: Informational F. Andreasen
Cisco Systems
November 2003
The Media Gateway Control Protocol (MGCP) Bulk Audit Package
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved.
IESG Note
This document is being published for the information of the
community. It describes a non-IETF protocol that is currently being
deployed in a number of products. Implementers should be aware of
RFC 3015, which was developed in the IETF Megaco Working Group and
the ITU-T SG16, and which is considered by the IETF and the ITU-T to
be the standards-based (including reviewed security considerations)
way to meet the needs that MGCP was designed to address.
Abstract
The base Media Gateway Control Protocol (MGCP) includes audit
commands that only allow a Call Agent to audit endpoint and/or
connection state one endpoint at a time. This document describes a
new MGCP package for bulk auditing of a group of gateway endpoints.
It allows a Call Agent to determine the endpoint naming convention,
the list of instantiated endpoints as well connection and endpoint
state for the group of endpoints.
Foster, et al. Informational
