RFC 982 (rfc982) - Page 1 of 11


Guidelines for the specification of the structure of the Domain Specific Part (DSP) of the ISO standard NSAP address



Alternative Format: Original Text Document



Network Working Group                                               ANSI
Request for Comments: 982                                     April 1986

        Guidelines for the Specification of the Structure of the
      Domain Specific Part (DSP) of the ISO Standard NSAP Address
                                    

                  ANSI Working Document X3S3.3/85-258

Status of This Memo

   The following is a RFC edition of the ANSI "Guidelines for the
   Specification of the Structure of the Domain Specific Part (DSP) of
   the ISO Standard NSAP Address".  It should be understood that this
   ANSI working document is in a draft state and subject to change.

   These Guidelines are an important prerequirement to allow IP
   addressing within the ISO connectionless protocol (CLNS), which
   itself is necessary to allow the coexistance of the IP and the CLNS
   in the Arpanet attached gateways.

   A RFC to specify a suitable IP addressing method for ISOgrams is
   currently worked on in Internet Task Forces and should be expected as
   an RFC shortly.

   This RFC is for informational purposes only  and  it's distribution
   is unlimited. It does not specify a standard for the Arpa-Internet.

                                    Hans-Werner Braun ()
                                                  University of Michigan























ANSI